WaterproofingTreatments
Thoroseal
Foundation Coating
Plaster Mix
Quickseal
Waterplug Cement
Thorite
Thorosheen
Acryl 60
Thorobond
Dry Joint
Thoroclear Special
Thoroglaze
Thoropatch
Thorolastic
Surface Bonding Mortar
Thorocoat
Stucco-Waterproof
Masonry Cleaners
Caulks and Sealants
Concrete Admixtures
Conproco Waterproofing
Curing Compounds
Construction Adhesives
Construction Sealers
Stucco
Epoxy Systems
Floors and Walls
Grout
Paints and Coatings
Roofing Materials
Thoro Waterproofing
Waterproofers
Water Repellents
 |
 |
 |
 |
 |
 |
Acryl 60 is a milky white liquid having a viscosity slightly higher than water and possesses freeze/thaw stability through 6 cycles.
Acryl 60 should be added to cement based mixes of mortars, plasters, stuccos, and concrete to increase their
mechanical strength, and chemical resistance properties, as well as increase and improve workability, ahesion, freeze/thaw resistance and curing characteristics.
Acryl 60 will improve the bonding qualities of approved materials applied over dense concrete, plaster or masonsry.
Use Acryl 60 with product as Thoroseal, Thoroseal Foundation Coating, Thorite, Structurite, Roadpatch II, Thoropatch, Thoroseal Plaster Mix, and Thoro Stucco and with
pointing mortars such as Dry Joint to improve adhesion and cure.
Please contact us via phone, fax or email if your require further product data. Our customer service staff is ready to assist you.
Phone: (203) 562-9948Acryl 60
Acryl 60 is a one component, water-based, non-yellowing acrylic polymer emulsion, used as an internal
admixture for Portland cement mortars, plasters, stuccos and concrete mixes. It significantly
improves adhesion, cohesion, tensile, compressive and flexural strengths of cement based materials.
It will not re-emulsify when exposed to water and has excellent chemical and ultraviolet light resistance.
Acrylic Polymer Liquid Internal Bonding Admixture
Chargar Coporation
299 Welton Street
Hamden, CT 06517
Toll Free: (800) 922-4623
Fax: (203) 562-2053
Email: answers@chargar.com