Water Repellents: Weep Tubes
Klere-Treat WB Ready to Use Masonry Water Repellent
Water Repellent
Products

SPEED SEAL
Enviroshield
Klere-Treat WB
Crystal Clear
Crystal Stain
Hydropoxy
Silicone Water Repellent
Water Repellent Emulsion
Drain Only Weep Tubes
Masonry Cleaners
Caulks and Sealants
Concrete Admixtures
Curing Compounds
Construction Adhesives
Construction Sealers
EIFS
Epoxy Systems
Floors and Walls
Grout
Paints and Coatings
Roofing Materials
Thoro Waterproofing
Waterproofers
Water Repellents



Home Page
Index
Email
Orders
Questions
Shipping

Drain Only Weep Tubes

Our drain only weep tubes are a 3.5 inch acrylic tube filled with non-woven geotextile that acts as a wick to draw moisture through the tube and out of the building. At one end the tube is bent in a downward position to prevent wind driven rain from being forced back into the tube and to prevent water running down the wall from re-entering the building. Drain only weep tubes will not fill with sediment because the fabric filters it, but allows the water to drain.

Standard size weep tubes

Our standard size weep tubes are 3.5 inchess in length and have an outside diameter of 3/8 inches (inside diameter 1/4 inch.)

Custom size weep tubes

If your application requires a different size we can custom manufacture a weep tube to fit your requirement. Please find our phone fax and email addresses below.

Please contact us via phone, fax or email if your require further product data. Our customer service staff is ready to assist you.




Chargar Coporation
299 Welton Street
Hamden, CT 06517

Phone: (203) 562-9948
Toll Free: (800) 922-4623
Fax: (203) 562-2053
Email: answers@chargar.com