|
Drain Only Weep TubesOur drain only weep tubes are a 3.5 inch acrylic tube filled with non-woven geotextile that acts as a wick to draw moisture through the tube and out of the building. At one end the tube is bent in a downward position to prevent wind driven rain from being forced back into the tube and to prevent water running down the wall from re-entering the building. Drain only weep tubes will not fill with sediment because the fabric filters it, but allows the water to drain.Standard size weep tubesOur standard size weep tubes are 3.5 inchess in length and have an outside diameter of 3/8 inches (inside diameter 1/4 inch.)Custom size weep tubesIf your application requires a different size we can custom manufacture a weep tube to fit your requirement. Please find our phone fax and email addresses below.Please contact us via phone, fax or email if your require further product data. Our customer service staff is ready to assist you. |
|
 |
Water Repellents | |
 EnviroshieldWater based silane, clear, water repellent
|
Hydropoxy Water based epoxy system
|
|
 |
Product Index This link provides quick access to all product lines and individual product pages. |
|
 |
Send Us an Email Simple questions or comments can be sent via standard email. Click the link above to send us yours! If your question is more involved or you need immediate assistance please find our toll free phone number below. |
|
 |
Shipping Information Shipping cost can be a major portion of overall cost, and should be considered when calculating total project cost. |
|
|
|
||
|
Chargar Corporation 299 Welton Street Hamden, CT 06571
Phone: (203) 562-9948 |
We manufacture and distribute products to fill your concrete and masonry, structural restoration, new construction and waterproofing needs.
From the planning stage of every project all the way to the finishing touches, we offer the assurance of exceptional quality, top value, and fast delivery. Please contact us if you have any questions on Water Repellents: Weep Tubes |
|
