Acryl 60Acrylic Polymer Liquid Internal Bonding Admixture

Acryl 60
Acrylic Polymer Liquid Internal Bonding Admixture

Acryl 60 is a one component, water-based, non-yellowing acrylic polymer emulsion, used as an internal admixture for Portland cement mortars, plasters, stuccos and concrete mixes. It significantly improves adhesion, cohesion, tensile, compressive and flexural strengths of cement based materials. It will not re-emulsify when exposed to water and has excellent chemical and ultraviolet light resistance.

Acryl 60 is a milky white liquid having a viscosity slightly higher than water and possesses freeze/thaw stability through 6 cycles.

Acryl 60 should be added to cement based mixes of mortars, plasters, stuccos, and concrete to increase their mechanical strength, and chemical resistance properties, as well as increase and improve workability, ahesion, freeze/thaw resistance and curing characteristics.

Acryl 60 will improve the bonding qualities of approved materials applied over dense concrete, plaster or masonsry. Use Acryl 60 with product as Thoroseal, Thoroseal Foundation Coating, Thorite, Structurite, Roadpatch II, Thoropatch, Thoroseal Plaster Mix, and Thoro Stucco and with pointing mortars such as Dry Joint to improve adhesion and cure.

Please contact us via phone, fax or email if your require further product data. Our customer service staff is ready to assist you.